A.3. SCSI parameters

Hardware	Module	Parameters
Adaptec 28xx, R9xx, 39xx	`aic7xxx.o`
3ware Storage Controller	`3w-xxxx.o`
NCR53c810/820/720, NCR53c700/710/700-66	`53c7,8xx.o`
AM53/79C974 (PC-SCSI) Driver	`AM53C974.o`
Most Buslogic (now Mylex) cards with "BT" part number	`BusLogic.o`
Mylex DAC960 RAID Controller	`DAC960.o`
MCR53c406a-based SCSI	`NCR53c406a.o`
Initio INI-A100U2W	`a100u2w.o`	a100u2w=`io`,`IRQ`,`scsi_id`
Adaptec AACRAID	`aacraid.o`
Advansys SCSI Cards	`advansys.o`
Adaptec AHA-152x	`aha152x.o`	aha152x=`io`,`IRQ`,`scsi_id`
Adaptec AHA 154x amd 631x-based	`aha1542.o`
Adaptec AHA 1740	`aha1740.o`
Adaptec AHA-274x, AHA-284x, AHA-29xx, AHA-394x, AHA-398x, AHA-274x, AHA-274xT, AHA-2842, AHA-2910B, AHA-2920C, AHA-2930/U/U2, AHA-2940/W/U/UW/AU/, U2W/U2/U2B/, U2BOEM, AHA-2944D/WD/UD/UWD, AHA-2950U2/W/B, AHA-3940/U/W/UW/, AUW/U2W/U2B, AHA-3950U2D, AHA-3985/U/W/UW, AIC-777x, AIC-785x, AIC-786x, AIC-787x, AIC-788x , AIC-789x, AIC-3860	`aic7xxx.o`
ACARD ATP870U PCI SCSI Controller	`atp870u.o`
Compaq Smart Array 5300 Controller	`cciss.o`
Compaq Smart/2 RAID Controller	`cpqarray.o`
Compaq FibreChannel Controller	`cpqfc.o`
Domex DMX3191D	`dmx3191d.o`
Data Technology Corp DTC3180/3280	`dtc.o`
DTP SCSI host adapters (EATA/DMA) PM2011B/9X ISA, PM2021A/9X ISA, PM2012A, PM2012B, PM2022A/9X EISA, PM2122A/9X, PM2322A/9X, SmartRAID PM3021, PM3222, PM3224	`eata.o`
DTP SCSI Adapters PM2011, PM2021, PM2041, PM3021, PM2012B, PM2022, PM2122, PM2322, PM2042, PM3122, PM3222, PM3332, PM2024, PM2124, PM2044, PM2144, PM3224, PM3334	`eata_dma.o`
Sun Enterprise Network Array (FC-AL)	`fcal.o`
Future Domain TMC-16`xx` SCSI	`fdomain.o`
NCR5380 (generic driver)	`g_NCR5380.o`
ICP RAID Controller	`gdth.o`
I2O Block Driver	`i2o_block.o`
IOMEGA MatchMaker parallel port SCSI adapter	`imm.o`
Always IN2000 ISA SCSI card	`in2000.o`	in2000=`setup_string`:`value` OR in2000 `setup_string=value`
Initio INI-9X00U/UW SCSI host adapters	`initio.o`
IBM ServeRAID	`ips.o`
AMI MegaRAID 418, 428, 438, 466, 762	`megaraid.o`
NCR SCSI controllers with 810/810A/815/ 825/825A/860/875/876/895 chipsets	`ncr53c8xx.o`	ncr53c8xx=`option1`:`value1`, `option2`:`value2`,`…` OR ncr53c8xx="`option1`:`value1 option2`:`value2…`"
Pro Audio Spectrum/Studio 16	`pas16.o`
PCI-2000 IntelliCache	`pci2000.o`
PCI-2220I EIDE RAID	`pci2220i.o`
IOMEGA PPA3 parallel port SCSI host adapter	`ppa.o`
Perceptive Solutions PSI-240I EIDE	`psi240i.o`
Qlogic 1280	`qla1280.o`
Qlogic 2`x`00	`qla2x00.o`
QLogic Fast SCSI FASXXX ISA/VLB/PCMCIA	`qlogicfas.o`
QLogic ISP2100 SCSI-FCP	`qlogicfc.o`
QLogic ISP1020 Intelligent SCSI cards IQ-PCI, IQ-PCI-10, IQ-PCI-D	`qlogicisp.o`
Qlogic ISP1020 SCSI SBUS	`qlogicpti.o`
Future Domain TMC-885, TMC-950 Seagate ST-01/02, Future Domain TMC-8`xx`	`seagate.o`	controller_type=2 base_address=`base_addr` irq=`IRQ`
Cards with the sym53c416 chipset	`sym53c416.o`	sym53c416=`PORTBASE`,`[IRQ]` OR sym53c416 io=`PORTBASE` irq=`IRQ`
Trantor T128/T128F/T228 SCSI Host Adapter	`t128.o`
Tekram DC-390(T) PCI	`tmscsim.o`
UltraStor 14F/34F (not 24F)	`u14-34f.o`
UltraStor 14F, 24F, and 34F	`ultrastor.o`
WD7000 Series	`wd7000.o`

Table A-3. SCSI Parameters

Here are some examples of these modules in use:

Configuration	Example
Adaptec AHA1522 at port 330, IRQ 11, SCSI ID 7	aha152x=0x330,11,7
Adaptec AHA1542 at port 330	bases=0x330
Future Domain TMC-800 at CA000, IRQ 10	controller_type=2 base_address=0xca000 irq=10

Table A-4. SCSI Parameters Configuration Examples